Ubiquiti UAP-AC-IW Unifi AP-AC-IW IN WALL Access Point - (Enterprise Computing > Wireless Networking)

Product Information

IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended. Devices will lose controller support in a controller version that is released AFTER the EOL date, and it will be clearly announced in release notes. In other words, it should be clear to the user before the upgrade happens, that the upgrade will terminate support. I want to reach out and announce that we are starting the EOL lifecycle for the following models of UniFi AP: To specify which AP and which band was being used, I used the settings offered in the UniFi network controller or Instant On portal, and swapped them in and out as needed. I then stepped through the different channel widths and bands, letting the connection stabilize before beginning my tests. With every foot of free space and every obstruction, a Wi-Fi signal attenuates and gets weaker. 5 GHz signals attenuate faster, and are more affected by obstructions. When deciding on how many access points you need, a good general rule is don’t expect 5 GHz coverage to extend further than 2 walls or 30 feet away.

An electrical wall box should be pre-installed with an Ethernet cable running from the box to a UniFi Switch with PoE.Posted Jan 2020: https://community.ui.com/questions/Announcement-EOL-for-some-UniFi-AP-models/65487283-ce9d-49f4-85b9-b6aa54659ef7 To test only the speed of the Wi-Fi connection between the client and the AP, my iPerf server was connected over gigabit Ethernet to my Switch Lite 8. I primarily used my dedicated pfSense box for this, but I also used my PC and laptop depending on what I was testing. Regional regulations must be observed when deploying radio equipment. More info Power Input Power Method Dual band, 802.11ac Wave 1 access point with a 2+ Gbps aggregate throughput rate that can be plugged into a standard wall outlet. End of Life (EOL): Device will be visible, but not configurable, in controllers released after the EOL date. It will continue to operate with its current configuration, and the controller will be able to forget the device.

IMPORTANT: The UAP-AC-IW requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.

Enterprise 48 PoE

Unifi UAP-AC-IW สร้างมาสำหรับการติดตั้งในผนัง ด้วยการออกแบบที่เหมาะสมกับการใช้งานในที่ต่าง ๆ ไม่ว่าจะเป็นห้องนอน, ห้องประชุม, ห้องพักโรงแรม หรือในสถานที่ทำงาน เปิดโอกาสให้คุณเชื่อมต่อไร้สายได้อย่างสะดวกสบายและมีประสิทธิภาพ Ubiquiti Networks Unifi UAP-AC-IW วันนี้! เปลี่ยนประสบการณ์การใช้งานอินเตอร์เน็ตของคุณให้ดียิ่งขึ้นด้วยอุปกรณ์ที่คุณคู่ควร! Looks like some of their APs are going EoL 1 March 2021, which means that any controller versions later than this will not allow you to configure the equipment. Please Note:PoE Injectors are not included with this device. Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW)

You may choose to restrict the collection or use of your personal information in the following ways:The U6-Pro has the best 2.4 GHz performance, due to it being the only model tested with Wi-Fi 6 support. 5 GHz performance depends on a lot of factors, but the AC-HD, U6-LR and U6-Pro performed the best overall. I don’t have a reliable way to test multi-client performance yet, but they should also offer the most performance in multi-client tests and realistic use. Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher) PoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP-AC-IW-PRO itself requires 10W. The range difference between the U6-Lite/U6-Pro and the U6-LR is large enough that it could be the difference between needing one or two APs to cover an area. In some situations one U6-LR is better, in others two lower-power APs may be better. It is hard to make general conclusions.